Top 10 Impact Bullet Puller – Gunsmithing Tools

As an Amazon Associate I earn from qualifying purchases.

1. Frankford Arsenal

#ad

Frankford Arsenal Quick-N-EZ Impact Bullet Puller, Stuck Case Remover for Ammo Reloading with Interchangeable Collets

#ad
Frankford Arsenal #ad - Includes: 1 hammer, 3 collets and 4 o-rings. Specs: 12” l x 5” W. Ease of use: works with one stern "whack" to separate bullet from brass. Compatability: Will not work with rimfire cartridges. Durable: constructed of lightweight aluminum and heavy-duty plastic. Versatility: 3 different sized collets included allows you to pull bullets from almost any caliber from. 22 hornet to 45-70, rimmed or rimless.
BrandFrankford Arsenal #ad
ManufacturerFrankford Arsenal #ad
Height1.61 Inches
Length2.09 Inches
Weight0.4 Pounds
Width7.09 Inches
Part Number836017
Model836017
Warranty1-year manufacturer

2. sky-w

#ad

Impact Bullet Puller with 3 Different Expandable Collets Pack of 1 Set

#ad
sky-w #ad - 1 include 3 different collects, 3 O-Rings and Instructions For Use. 2 works with almost every Caliber from 22 Hornet to 45-703 material: polycarbonate Impact Style Body with a Solid Metal Shaft.
Brandsky-w #ad
Manufacturersky-w #ad
Weight0.13 Kilograms

3. Tactical45

#ad

3 Expandable Collets fits .17 to 50 Caliber Guns for Removing Bullets, Tactical45 Impact Bullet Puller Hammer Tool

#ad
Tactical45 #ad - Package contents: package includes a single 11. 5-inch 29. 2cm reloading bullet extractor with 3 heavy-duty rubber O-rings and 3 different sized collets; Diagram and step-by-step instructions are included. How to use: place collet in the hammer bullet puller and loosely screw on the cover; Insert the bullet tip into the collet and fully tighten the cover; “Whack” the hammer 4-5 times against a hard surface until the bullet falls down the extractor bullet hammer chamber releasing the powder from the casing.

Remove bullets: use the tactical45 bullet puller hammer to salvage the primer and case of your ammunition even after the bullets are loaded and crimped; Bullets will not shoot properly if the rounds are filled with the wrong powder.

Use with existing calibers: 3 expandable collets are compatible with. 17 to 50 caliber guns; impact bullet puller hammer works with almost every caliber from 22 Hornet to 45-70; Use with rimmed and rimless bullet cartridges. Pro tips: never reuse the powder extracted from the casing; Use the kinetic bullet puller hammer if you mess up when reloading the bullet you put the wrong powder in the wrong bullet weight.
BrandTactical45 #ad
ManufacturerTactical45 #ad
Height1.4 Inches
Length11.8 Inches
Weight0.4 Pounds
Width4.8 Inches
Part Number819927

4. Safety Solution

#ad

Safety Solution Impact Bullet Puller Tool with 3 Expandable Collets – Bullet Remover Hammer Kit for .17 to 50 Caliber Guns Bullet Puller

#ad
Safety Solution #ad - Durable: constructed from polycarbonate impact style body with a solid metal shaft for strength and longevity; 11. 5” 29. 2cm overall length; Includes 3 heavy-duty rubber O-rings and 3 different sized collets.

Practical: the safey solution bullet puller tool with 3 expandable Collets – Bullet Remover Hammer Kit for. 17 to 50 caliber guns easily pulls bullets from reloaded ammunition and allows you to reuse the brass, projectile, and powder. Comfortable grip: 4” 102cm textured, molded, deep-profile handle for secure grip and less user fatigue. Compatible: works with almost every caliber from 22 Hornet to 45-70; For rimmed and rimless bullet cartridges; See full product description for complete fitment list.
BrandSafety Solution #ad
ManufacturerJohnsonbrother Inc #ad

5. Hornady

#ad

Hornady Lock-N-Load Impact Bullet Puller – A Reloading Tool, Easily Remove Bullets and Powder from Cartridges for Reuse – Works with Cartridges from .22 to .45 Caliber – Item No. 050092

#ad
Hornady #ad - Keep tapping until the bullet is released from the cartridge. Will not damage the bullets. How to use – hold the bullet puller like a hammer and tap the opposite end of the cap on a hard surface.

Various cartridge sizes – the hornady lock-n-Load Impact Bullet Puller is effective on most rifle or pistol cartridges from. 22 up to. 45 caliber. Hornady bullet puller – the l-n-l impact Bullet Puller captures the bullet and powder for reuse by removing bullets from cartridges without causing damage. Extra storage – The innovative handle design stores two extra collets. Reuse powder and bullets – the hollow head of the bullet puller removes the bullet AND powder from cartridges for reuse.
BrandHornady #ad
ManufacturerHornady #ad
Height1.6 Inches
Length16.2 Inches
Weight0.7 Pounds
Width6.8 Inches
Part Number50092
Model50092
WarrantyNo-Risk, Lifetime Warranty

6. AmeriGun Club

#ad

AmeriGun Club Quick and Easy Impact Bullet Puller

#ad
AmeriGun Club #ad - Works with practically every caliber from 22 Hornet to 45-70 Works with one stern "whack" to separate bullet from brass. Impact-style tool to easily pull bullets. Works with rimmed or rimless bullets. 3 different collets included.
BrandAmeriGun Club #ad

7. Alice Browning

#ad

Alice Browning Easy Impact Bullet Puller with collets

#ad
Alice Browning #ad - 3 different collets included. Works with practically every caliber from 22 Hornet to 45-70 Impact-style tool to easily pull bullets. Works with one stern "whack" to separate bullet from brass. Works with rimmed or rimless bullets.
BrandAlice Browning #ad
ManufacturerYuyao Yanzhen Metal Technology Co.,LTD #ad
Height1.97 Inches
Length5.91 Inches
Width3.94 Inches
Part NumberYZ-19
ModelYZ-19

8. Safety Solution

#ad

Impact Bullet Puller Tool with 3 Expandable Collets – Bullet Remover Hammer Kit for .17 to 50 Caliber Guns Puller 2 Packs

#ad
Safety Solution #ad - Compatible: works with almost every caliber from 22 Hornet to 45-70; For rimmed and rimless bullet cartridges; See full product description for complete fitment list.

Durable: constructed from polycarbonate impact style body with a solid metal shaft for strength and longevity; 11. 5” 29. 2cm overall length; Includes 3 heavy-duty rubber O-rings and 3 different sized collets. Practical: the safey solution bullet puller tool with 3 expandable Collets – Bullet Remover Hammer Kit for. 17 to 50 caliber guns easily pulls bullets from reloaded ammunition and allows you to reuse the brass, projectile, and powder. Comfortable grip: 4” 102cm textured, molded, deep-profile handle for secure grip and less user fatigue.
BrandSafety Solution #ad
ManufacturerJohnsonbrother Inc #ad

9. RCBS

#ad

RCBS Pow'r Pull Kit

#ad
RCBS #ad - Rcbs is the leading manufacturer of ammunition reloading equipment for rifles and pistols. Ergonomic handle. Made of the highest quality materials. Another quality Bushnell product. Resolves mistakes quickly and easily. Hunting reloading bullet Pullers.
BrandRCBS #ad
ManufacturerRCBS #ad
Height1.13 Inches
Length15.88 Inches
Weight0.13 Pounds
Width6.75 Inches
Part Number9412
Model9412
WarrantySEE MANUF.

10. Lyman

#ad

1 Pack, Lyman Magnum Inertia Bullet Puller Multiple

#ad
Lyman #ad - Ergonomic molded handle with rubber insert for comfort and sure grip. Prevents damage to bullet or case. Safely strips loaded rounds in seconds without damage to bullet or case. Safely strips loaded rounds in seconds. Traps components with just a few raps on the bench. Traps components with just a few hits. Head design that allows use on calibers from Tiny 5. 7 x 28fn to the largest magnums. Fits a full range of calibers from tiny 5. 7 x 28fn to the largest Magnums. Ergonomic molded handle for comfort and sure grip.
BrandLyman #ad
ManufacturerLyman #ad
Height1.69 Inches
Length4.88 Inches
Weight0.29 Pounds
Width1.89 Inches
Part Number7810216
Model7810216
WarrantyOne year warranty